Rush MH-3 Beam User Manual download pdf (Page 24)

24 RUSH MH 3 Beam User Manual

Lamp operating hours counter

The resettable lamp operating time counter lets you monitor lamp use and see

when lamp replacement is due. The counter is available in the FIXTURE

INFORMATION→LAMP ON TIME menu. Do not exceed the specified lamp

lifetime, or the lamp may explode. Reset the counter when you replace the

lamp.

Firmware version

To display the software version installed in the fixture:

1. Select FIXTURE INFORMATION and press ENTER to confirm.

2. Use the DOWN and UP buttons to select FIRMWARE VERSION and

press ENTER to confirm. The firmware version is shown in the display.

3. Press MENU to exit.

Reset functions or effects

The various effects—pan, tilt color, gobos, iris, focus, prism—or all effects, can

be manually reset to their home positions:

1. Select RESET FUNCTIONS and press ENTER to confirm.

2. Use the DOWN and UP buttons to select the function or effect that is to be

reset. Press ENTER.

3. Use the DOWN and UP buttons to select YES and

4. Press ENTER to confirm (or press MENU to exit without making a

change).

Special functions

Fixture Maintenance

To help you monitor service intervals, the maintenance timer lets you set an

interval and display the remaining time in hours before the end of the interval

is reached.

Reset factory default settings

The fixture’s default settings can be restored using SPECIAL

FUNCTIONS→FACTORY SETTINGS.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

No comments

Rush MH-3 Beam User Manual Page 24