Rush MH-3 Beam User Manual download pdf (Page 20)

20 RUSH MH 3 Beam User Manual

Blackout during change or movement

The fixture can be set so that when running a show, blackout is enabled

during gobo change, color change, and/or pan and tilt movement. This is

switched off by default. To adjust the blackout during show playback settings:

1. Select FIXTURE SETTINGS and press ENTER to confirm.

2. Use the DOWN and UP buttons to select BL. O. P/T MOVING, BL.

O.COLOR CHANGE, or BL. O: GOBO CHANGE and press ENTER to

confirm.

3. Use the DOWN and UP buttons to select YES (blackout during movement

or change) or NO (normal).

4. Press ENTER to set (or press MENU to exit without making a change).

Lamp settings

Lamp on/off

To turn the lamp on or off via the control panel:

1. Select LAMP SETTINGS and press ENTER to confirm.

2. Use the DOWN and UP buttons to select ON/OFF and press ENTER to

confirm.

3. Use the DOWN and UP buttons to select ON or OFF.

4. Press ENTER to confirm (or press MENU to exit without making a

change).

State/power on

To set whether the fixture should power the lamp on automatically when the

fixture is powered on:

1. Select LAMP SETTINGS and press ENTER to confirm.

2. Use the DOWN and UP buttons to select STATE/POWER ON and press

ENTER to confirm.

3. Use the DOWN and UP buttons to select ON or OFF.

4. Press ENTER to confirm (or press MENU to exit without making a

change).

Off via DMX

To enable the lamp to be turned off via DMX:

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

No comments

Rush MH-3 Beam User Manual Page 20