Rush MH-3 Beam User Manual download pdf (Page 19)

RUSH MH 3 Beam User Manual 19

4. Once the address has been selected, press ENTER to set it (or press

MENU to exit without making a change).

DMX viewer

You can check the DMX values that the fixture is receiving on each DMX

channel in the VIEW DMX VALUE menu.

To see the DMX values:

1. Select DMX FUNCTIONS and press ENTER.

2. Use the UP and DOWN buttons to select VIEW DMX VALUE and press

ENTER.

3. Use the UP and DOWN buttons to scroll through the DMX channels and

press ENTER to select a channel. The fixture will display the DMX value it

is receiving on that channel.

4. Press MENU to exit the viewer.

Fixture settings

Pan and/or tilt inversion

The FIXTURE SETTINGS→PAN INVERSE and TILT INVERSE menus can be

used to reverse the direction of pan and/or tilt. These settings are useful for

symmetrical effects with multiple fixtures, or when coordinating the movement

of fixtures that are floor mounted and rigged upside down.

To adjust the pan inversion settings:

1. Select FIXTURE SETTINGS and press ENTER to confirm.

2. Use the DOWN and UP buttons to select PAN INVERSE or TILT

INVERSE and press ENTER to confirm.

3. Use the DOWN and UP buttons to select the YES (inversion) or NO

(normal) mode.

4. Press ENTER to set (or press MENU to exit without making a change).

Pan/tilt feedback

When pan/tilt feedback is enabled and pan or tilt loses its correct position, the

fixture will detect this and reset pan and tilt so that the correct pan/tilt position

is restored.

To deactivate or activate this function, use the FIXTURE SETTINGS→P/T

FEEDBACK menu.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

No comments

Rush MH-3 Beam User Manual Page 19