Rush MH-3 Beam User Manual download pdf (Page 23)

RUSH MH 3 Beam User Manual 23

Adjust backlight intensity

To adjust the brightness of the control panel display:

1. Select DISPLAY SETTINGS and press ENTER to confirm.

2. Use the DOWN and UP buttons to select BACKLIGHT INTENSITY and

press ENTER to confirm.

3. Use the DOWN and UP buttons to select a level from 1 to 10.

4. Press ENTER to confirm (or press MENU to exit without making a

change).

Fixture test

You can run an automatic test of all functions, or manually test individual

functions from the control menus.

Auto test

To perform a complete test of all of the fixture functions:

1. Select FIXTURE TEST and press ENTER to confirm.

2. Use the DOWN and UP buttons to select AUTO TEST and press ENTER

to confirm. The automatic test will run.

3. Press MENU to exit the test.

Manual test

Fixture functions can be tested or controlled without a DMX signal:

1. Select FIXTURE TEST and press ENTER to confirm.

2. Use the DOWN and UP buttons to select MANUAL TEST and press

ENTER to confirm.

3. Select and activate the functions you wish to control.

4. Press MENU to exit.

Fixture information

Fixture operating hours counter

To display the total number of hours the fixture has been used:

1. Select FIXTURE INFORMATION and press ENTER to confirm.

2. Use the DOWN and UP buttons to select FIXTURE USE TIME and press

ENTER to confirm. The number of hours is shown in the display.

3. Press MENU to exit.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

No comments

Rush MH-3 Beam User Manual Page 23