RUSH MH 4 Beam User Manual 19
Special functions
Fixture maintenance
You can schedule fixture maintenance by setting an interval in hours until the next
service must be carried out. You can then view the number of hours remaining
until this interval has been reached:
1. Select FIXTURE MAINTENANCE and press ENTER to confirm.
2. Use the DOWN and UP buttons to select INTERVAL or REMAIN TIME.
Interval
1. Select INTERVAL and press ENTER to confirm. The interval time will show
on the display.
2. Press MENU button to exit.
Remain Time
1. Select Remain Time and press ENTER to confirm. The remaining time will
show on the display.
2. Press ENTER, then use the DOWN and UP buttons to select EXIT or RESET
TIME. EXIT returns to the previous menu without changing the remaining
time. RESET TIME restarts the timer countdown at the number of hours
defined in INTERVAL.
3. Press ENTER to confirm or press MENU to exit.
Factory settings
The fixture’s factory default settings can be restored using FACTORY SETTINGS.
Effect home position adjustment
The various effects—pan, tilt, shutter, color, gobo, prism, rotating prism and
focus—can lose or move out of their indexed home position. To reset any of
these:
1. In the menu structure, press ENTER and hold for at least 3 seconds to enter
the OFFSET MENU.
2. Use the DOWN and UP buttons to choose the function that needs to be
adjusted. Press ENTER to select it.
3. The present indexed home position will flash in the display. Use the DOWN
and UP buttons to adjust the home position of the function or effect.
4. Once the correct position has been reached, press ENTER to set this (or to
return to the previous menu level without making a change, press MENU).
Comments to this Manuals